Time-Sert M8x1.25 Metric Insert Kit w/(5) 11.7mm Length Inserts Review

I had never seen the Time-Sert kit before but I had already tried without luck to use an epoxy-metal thread repair kit.I had to do some careful measuring to figure out which kit I needed.I was repairing a stripped transmission drain plug on a 150 CC GY6 type motor scooter.I had to measure the total depth of the thread (it was a blind hole).I had to ensure that there was additional space past the end of the threaded hole to allow the tap in the kit to completely finish the thread job.(I used a bent paper clip to gauge the depth and then measured it on a ruler).I also needed to make sure of the type threads I needed.(I took the drain plug screw to a big box store and used their gauge to measure it).I also used heat-resistant Loctite to ensure no leaks when I did the final install of the new steel threads.I did need to buy an inexpensive thread tapping wrench because the square socket ends don't work with a standard socket set.After about 30 minutes it was all done and it works like a champ!

Click Here to see more reviews about: Time-Sert M8x1.25 Metric Insert Kit w/(5) 11.7mm Length Inserts

Product Description:
Time-Sert Metric Thread Repair Kits KITS CONTAIN: Drill, Counterbore, Tap, Installation Driver & (5) Carbon Steel Inserts Time-Sert M8x1.25 Metric Insert Kit w/(5) 11.7mm Length Inserts

Buy cheap Time-Sert M8x1.25 Metric Insert Kit w/(5) 11.7mm Length Inserts now Get 13% OFF