Lisle 46600 Inner Tie Rod Tool Review

this is a great tool, i got it on time and in exelent condition, i recoment this tool if you are a mechanic for every day purpose or if you want to save some time and money, no more pipe wrench vise grips etc.
i use it in few diferent cars and its great.

Click Here to see more reviews about: Lisle 46600 Inner Tie Rod Tool

Product Description:
Lisle Inner Tie Rod Tool is designed with completely round end socket that fits inner tie rod sockets with flats up to 1 31/64 inch. It features wrench head with three set screws that tighten against the rounded tie rod socket or socket flats. This tool includes a quarter inch short head hex wrench for tightening set screws in hard to reach areas. It is used with half inch drive and it works on many Chrysler applications, Ford and Nissan with the non-flat round end socket. It helps speed tie rod replacement time. This tool is backed by a lifetime warranty and is easy to use.

Buy cheap Lisle 46600 Inner Tie Rod Tool now Get 18% OFF

Danaher Tool Group KDS41690 Front End Service Kit Review

I bought this kit for my brother as a Christmas present, since I had several similar tools for front end work on my Hondas and F150. My brother was always borrowing these tools, so I knew he could use them and I could get my tools back!
We looked the tools over and they seemed to be of the highest quality and
my brother has verified that they work well too, since he replaced 2 tie rod ends in the week he got the gift.
The kit has 5 tools in it and this is a great bargain because it is cheaper than just 1 of the tools sold separately (if you can find them).
Also, these tools allow you to disassemble tie-rods and ball joints without damaging the rubber boots. So, get rid of that crappy pickle fork!
I highly recommend this Service kit.

Click Here to see more reviews about: Danaher Tool Group KDS41690 Front End Service Kit

Product Description:

This versatile set allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints Kit Contents: 2289 Pitman Arm Puller 22 x 140mm, 3533 Tie Rod Puller, 3916 Universal Ball Joint Separator, 3917 Tie Rod End Puller and Pitman Arm Puller, and 3918 Universal Tie Rod End Remover

Buy cheap Danaher Tool Group KDS41690 Front End Service Kit now Get 21% OFF

29 mm Crow's Foot for Inner Tie Rod (LIS46270) Category: Steering Rack and Pinion Tools Review

It's another adapter to use with your Inner Tie Rod Removal/Installation tool!!!If you need one that fits a 29mm Inner tie Rod, here you go!!!

Click Here to see more reviews about: 29 mm Crow's Foot for Inner Tie Rod (LIS46270) Category: Steering Rack and Pinion Tools

Product Description:
Item #: LIS46270.
Features & Benefits

Works on the inner tie rods with inaccessible wrench flats
Fits '02-'06 Camry, '99-'05 Celica, '06 Avalon
Fits '97-06 Corolla, '00-'06 Prius
Fits '00-'03 Highlander
Fits '99-'06 Echo

This Crow's Foot is for use with 45750 inner tie rod tool. Fits many Toyota applications.
Customers also search for: Tools and Storage\Automotive\Vehicle Specialty Tools\Steering Rack and Pinion Tools Discount 29 mm Crow's Foot for Inner Tie Rod, Buy 29 mm Crow's Foot for Inner Tie Rod, Wholesale 29 mm Crow's Foot for Inner Tie Rod, 083045462705, ToolWeb, Linkage Tools

Buy cheap 29 mm Crow's Foot for Inner Tie Rod (LIS46270) Category: Steering Rack and Pinion Tools now Get 50% OFF

Upper Control Arm Bushing Removal Tool Repair Ford GM Review

The previous reviewer noted this is only for changing ball joints, however, he was mistaken. The included directions are only for how to change your ball joints, but this kit allows you to use the press to change either. The notch cut out on the press and the fittings allow you to slide it onto the control arm shaft and press the bushings out. It took me 5 minutes to press out both on one control arm. If you look at ball joint presses, this is the same tool, with the exception of the notch which allows it to also be used for control arm bushings.

The press seems as well made as any tool made in China and worked well and smooth. The threads came greased and did not bind when pressing the bushings through the control arm opening. This tool was highly recommended to me and I would recommend it to anyone.

The tool shipped the next business day after I ordered it and arrived via FedEx.

Click Here to see more reviews about: Upper Control Arm Bushing Removal Tool Repair Ford GM

Product Description:
A professional quality Upper Control Arm Bushing Service Set. This item features: * C Frame * Screw Assembly * All Adapters Needed for Replacing Pressing Type Upper Control Arm Bushing on Most Late Model of Ford, GM & Chrysler Vehicles with out Removing the Control Arm * Blow molded case

Buy cheap Upper Control Arm Bushing Removal Tool Repair Ford GM now Get 67% OFF